For the 71 inch flange the correct black slide topper would be the part # LCV000165063 then for the 81 inch slide out you'd want the # LCV000165062 and you'd be set. view full answer...
For what you are looking for you would want the Denver Mattress part # DE53ZR as this is a folding mattress in the queen short size you need of 74 inches long and 60 inches wide. view full answer...
I have some great options for carrying two kayaks and two bikes behind a motorhome, the trailer will be best used for the kayaks due to the crossbar spread. I recommend the Malone EcoLight Sport Trailer for 2 Kayaks part # MAL93FR for this. Then, in order to carry the two bikes you can use the Gen-Y Adjustable 2-Ball Mount part # 325-GH-414 along with a bike rack of your choice. The Hollywood Racks RV Rider Bike Rack part # HLY64FR is e-bike rated and can be used on a motorhome. view full answer...
I recommend the Redarc Tow-Pro Elite Brake Controller # RED63RR for your 2023 Jayco Melbourne. This uses a small control knob mounted to your dash so you do not have to deal with a large box like other controllers use mounted to the dash. The Adapter # 3063-P will plug into the factory connector on your Mercedes Benz 3500 Sprinter chassis. view full answer...
The correct Roadmaster anti-sway bar for your 2018 Mercedes-Benz Sprinter 3500 chassis is part # RM-1209-131. This does require some drilling but it also retains (and enhances) your OEM anti-sway bar. You'd actually be pretty surprised at how much adding even just a thicker anti-sway bar can improve the handling of your motorhome.
You are definitely looking in the right place when you mention the SumoSprings to help with enhancing your ride as well. I recommend adding SumoSprings # SSR-338-47... view full answer...
The correct weight capacity SumoSprings system for your 2020 Jayco Melbourne will depend on how much support you are looking for. If you are not getting a lot of body roll and just need a little support, go for the 900 pound # SSR-338-47.
On the other hand, if you are getting a lot of body roll and or sag and need a good amount of support, the # SSR-338-54 will be the better option. With that said, the 2020 Jayco Melbourne 24L weighs just over 11,000 pounds, so the lower capacity # SSR-338-47... view full answer...
Based on my research, it looks like your 2013 Jayco Melbourne is built on the Ford E-450 chassis. I do recommend verifying this is as it's possible you have a different submodel.
We have a large selection of floor mats that are confirmed to fit the E-450 chassis. I have attached a link that will take you to our available selection that you can look through. I recommend looking at the WeatherTech # WT26DV. These are really nice, extra-durable floor mats with a high-density tri-extruded... view full answer...